Oceaneering L3 Rope Access Technician Jobs in Nigeria

Oceaneering L3 Rope Access Technician Jobs in Nigeria

Position Summary

The NDT Technician is responsible for using a range of analysis techniques used in the Inspection Industry to evaluate the properties of a material, component or system without causing damage.

The technician will typically complete NDT inspection works at the Jandakot facility or at a Client’s site. Remote site inspections are undertaken at onshore/offshore facilities. Inspection works undertaken in remote project sites is demanding due to the work locations, extreme temperatures and extended work shifts.

The NDT Technician is responsible for using a range of analysis techniques used in the Inspection Industry to evaluate the properties of a material, component or system without causing damage.
The technician will typically complete NDT inspection works at the Jandakot facility or at a Client’s site.

Remote site inspections are undertaken at onshore/offshore facilities. Inspection works undertaken in remote project sites is demanding due to the work locations, extreme temperatures and extended work shifts.

Duties & Responsibilities

Essential:

Level I:

An individual certified to Level I has demonstrated competence to carry out NDT according to written instructions and under the supervision of Level II or Level III personnel. Within the scope of the competence defined on the certificate, Level I personnel may perform the following with NDT instructions:

Set up NDT equipment;

Perform/conduct the tests;

Record and classify the results of the tests according to written criteria; and

Populate a report under supervision.

[Level II:

An individual certified to Level II has demonstarted competence to perform NDT according to NDT procedures. Within the scope of the competence defined on the certificate. Level II shall be competent in:

Select the NDT technique for the test method to be used;

Define the limitations of application of the testing method;

Translate NDT code, standards, specifications and procedures into NDT instructions adapted to the actual working conditions;

Set up and verify equipment settings;

Perform and supervise tests;

Interpret and evaluate results according to applicable standards, codes specifications or procedures;

Prepare written instructions;

Carry out and supervise all tasks at or below Level II, and

Report the results of non-destructive tests.

Level III

An individual certified to Level III has demonstrated competence to perform direct NDT operations for which certified.

The Level III shall be compenent with the following:

Evaluate and interpret results in terms of existing standards, codes and specifications;

Has sufficient practical knowledge of applicable materials, fabrication, process, and product technology to select NDT methods, establish NDT techniques, and assist

in establishing acceptance criteria where otherwise are not available;

General familiarity across other NDT methods;

Where applicable assume technical responsibility for facility NDT staff;

Establish, review for editorial and technical correctness and validate NDT instructions and procedures;

Designate the particular test methods, techniques and procedures to be used within the scope and limitations of any certification held;

Carry out tasks at all levels; and

Provide supervision and guidance for NDT personnel at all levels.

Qualifications

Required:

Conventional Methods:

Magnetic Particle Inspection (MPI) ISO9712 certification

Liquid Penetrant Inspection (LPI) ISO9712 certification

Dye Penetrant Testing (PT2);

Radiography (RT) ISO 9712 certification

Radiation License (Relevant State)

Advanced Methods:

Phased Array (PA) ISO9712 certification

Time of Flight Diffraction (TOFD) ISO9712 certification

Eddy Current Tubes (ETT) ISO9712 certification

Inspection Methods:

Welding Inspection (WI) CSWIP

American Petroleum Institute (API) inspector

Australian Institute of Certification of In-service Personnel (AICIP) Inspector

Desired Knowledge, Skills, Abilities, and Other Characteristics:

Ensures that important information from management is shared with employees and others as appropriate

Gives and receives constructive feedback

Ensures that others involved in a project or effort are kept informed about developments and plans

Ensures that regular consistent communication takes place within area of responsibility
Working Conditions

Physical Activity/Requirements

The physical demands described in the Asset Integrity-Occupational Role Profile- NDT Technician are the representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

How to Apply

For more information and job application details, see; Oceaneering L3 Rope Access Technician Jobs in Nigeria

Find Latest Jobs in Nigeria Today - Recruitment in Nigeria Job - Nigerian Jobs - in Nigeria - Job Vacancies in Nigeria

Search our career portal & find the latest Nigerian job positions, career opportunities & jobs in Nigeria.

Jobs in Nigeria - banking jobs in Nigeria, IT jobs in Nigeria, accounting jobs in Nigeria, NGO jobs in Nigeria, business administration in Nigeria, ICT jobs in Nigeria, UN jobs in Nigeria, procurement jobs in Nigeria, education jobs in Nigeria, hospital jobs in Nigeria, human resources jobs in Nigeria, engineering jobs in Nigeria, teaching jobs in Nigeria, and other careers in Nigeria.

Oil and Gas job vacancies in Nigeria, MTN jobs in Nigeria, job vacancies in Nigeria for fresh graduates.

Federal government jobs in Nigeria, job vacancies in Nigeria Federal Civil Service.

Find your dream job from 1000s of vacancies in Nigeria posted and updated daily - click here!