KCA Deutag Group Assistant Drilling Project Manager Jobs in Nigeria
KCA Deutag Group Assistant Drilling Project Manager Jobs in Nigeria
Purpose of Job The Assistant Drilling Project Manager is assisting the Drilling Project Manager with the responsibility for the safe, economic and efficient operation of the rig and camp Iin accordance with KCA Deutag (Company) Business Managements Systems (EMS), Clients' standards and Country laws
The Assistant Drilling Manager will take over the responsibility and duties, whenever the Drilling Project Manager is not available.
Area(s) of Responsibility
To demonstrate and promote safety leadership
To plan and manage the activities of the drilling crews such that drilling operations are conducted:
Safely, efficiently and effectively
In accordance with KCA Deutag and Operator's policies and to the highest standards of international good oilfield practice
In conformance with applicable legislation and standards
To work with the Operator's representatives and those of other contractors on site to optimize the use of resources, achieve cohesion of the inputs to drilling operations and to create a spirit of cross-company team work
To apply his experience directly in the event of non-routine activities on the rig and to assume control and manage the crews and resources in the event of an incipient or actual emergency or incident
To advise the Drilling Project Manager and Operator's representative of all issues which could merit their attention
To maintain and enhance as appropriate, the rig and associated equipment to retain its asset value and marketability, and to continuously develop improvements to rig site practices so as to enhance safety and performance
Supervises:
The drilling project and personal on behalf of Company.
Key Tasks
Personally responsible for own safety and conducting one's self to the standards of Company Policies and Procedures
Take personal responsibility for, and demonstrate leadership in HSE
Plays leading role in safety meetings and the safety program
Provide leadership, guidance and coaching to direct reports and manage their efforts so as to maximize their contribution to operational effectiveness and performance
Direct enactment of the Operator's drilling programs and manage Company resources being applied to the drilling activities at site so as to achieve safe, efficient and effective operations
Ensure that the rig is operated in accordance within the design parameters and in conformance with Companies BMS.
Be present at the rig floor or relevant area of the rig to direct all critical activities
Take responsibility for planned maintenance, certification, record-keeping and reporting
Assist the DPM to ensure all equipment on site (including sub-contractors and Clients equipment) is suitable for use and in safe condition
Assist the DPM to maintain all required record and documentation at rig site in an organized manner and produce accurate and timely reports on all aspects of rig operations and personnel matters
Assist the DPM to develop rig move plans and manage rig moves, taking personal responsibility for safely rigging-down & rigging-up of the drilling rig, camp and associated equipment
Establish a culture of continuous improvement in operations and demonstrate results in this regard
Work with the Operator's site personnel and other site contractors to develop improved practices which will positively impact on drilling Performance
Ensure that drilling operations are conducted in accordance with policies and practices of Company, the Operator and relevant national authorities
Liaise with Operator's other contractors who are involved in operations so as to achieve cohesion in concurrent / simultaneous operations and cross-company teamwork & effectiveness
Take responsibility for all HR matters at rig site, including training and development of expatriate and national staff in the rig crews particularly with regard to on the job training
Maintain the validity of personal certification and training together with that for the rig crews
Assist the DPM with preparation of incident report are filled out in detail and in a timely manner in the event of an incident, illness, near miss, equipment damage or environmental spill
Ensure understanding of, and compliance with, Company permit to work system
Assist the DPM with completion of all daily / monthly approval
Ensure compliance with all statutory pollution prevention procedures
Assist the DPM when planning maintenance and repair tasks so as to minimize the effect on the drilling operation
Supervise the order, cleanliness and housekeeping at all relevant work sites and around all rig equipment
Assist the DPM with adequate supply of spare parts
which, are maintained on the installation and stored in environmentally sound conditions
Ensure that all sections of the Enhanced Drilling Reporting System (EDRS) are updated on a dally basis
To ensure representatives of certifying authorities on Inspections of the Installation are accompanied as required.
Primary Responsibilities
Safety is a line of responsibility. Each individual member of the company should be aware of his responsibility to ensure safe working in his respective area.
Apply Company safety regulations at all times
Report to the Line Supervisor all the potential hazards and abnormal situations
Obtain the necessary safety clearance for the nature / type of work to be carried out, in advance, in consultation with the HSE Adviser and in accordance with safety procedures (i.e. Work Permit).
Explain to the persons concerned the visible and hidden hazards Involved in the jobs. (Job Safety Analysis / Prejob meeting).
Instruct personnel before commencing the work to the safety precautions and measures to be observed at work (tool box meetings).
Investigate and report near misses and correct them immediately
Promptly report to line management, any violation of safety regulations by the personnel, even if this violation has not resulted man accident.
Financial:
To have a good understanding of budgets and demonstrate an awareness to stay in the budget.
Systems and Processes:
Comply with the Permit to Work systems in operation on the rig and Base
Consult KOMS before the execution of each job to assure the latest standard is in place
Assure that all rig specific work instructions are available on site
Assure rig move plans and equipment load lists are available before starting of a rig move
Assure the EDRS is correct and up to date.
People:
Ensure that all subordinates have sufficient information and knowledge to carry out their job without endangering any persons, plant or equipment and are adequately trained and experienced for a particular task before they are instructed to carry it out.
Ensure that health and safety at work and accident prevention are continuously brought to the attention of all employees under his authority by means of job supervision, Instruction and training
Assure that all subordinates under his command are appraised yearly on a fair basis
Assure that all subordinates are trained to but not limited to companies' minimum training standard.
Quality:
Ensure compliance to all relevant Group management systems and where applicable client procedures
Requirements
Minimum Experience:
2 years proven experience working in a similar position in the drilling industry. international experience is an advantage.
Additional Qualifications:
It is needed that the Assistant Drilling Project Manager is able to support and troubleshoot on all Bentec Control systems as Mud pumps, SCR, Top Drives and Draw-works.
The DPM must have a minimum working experience of 3-5 years working with Bentec control system.
Required Personal Attributes:
Commitment to safe working practices, policies and legislation
Enthusiastic, self-molivator
Good Interpersonal, organisational and communication skills in good English
Ability to work individually and as part of a team
Willing to travel and work in other countries on Companies requests.
Be flexible to work outside the normal hours if the situation requires that
Willing to join Companies training program (i.e. Drilling Course 1 & 2).
How to Apply
Interested and qualified candidates should send their Applications to be accompanied with all credentials and CV to:
Nigeria.hhr@kcadeutag.com using the Job Title as the subject of the mail.
Find Latest Jobs in Nigeria Today - Recruitment in Nigeria Job - Nigerian Jobs - in Nigeria - Job Vacancies in Nigeria
Search our career portal & find the latest Nigerian job positions, career opportunities & jobs in Nigeria.
Jobs in Nigeria - banking jobs in Nigeria, IT jobs in Nigeria, accounting jobs in Nigeria, NGO jobsin Nigeria, business administration in Nigeria, ICT jobs in Nigeria, UN jobs in Nigeria, procurement jobs in Nigeria, education jobs in Nigeria, hospital jobs in Nigeria, human resources jobs in Nigeria, engineering jobs in Nigeria, teaching jobs in Nigeria, and other careers in Nigeria.
Oil and Gas job vacancies in Nigeria, MTN jobs in Nigeria, job vacancies in Nigeria for fresh graduates.
Federal government jobs in Nigeria, job vacancies in Nigeria Federal Civil Service.
Find your dream job from 1000s of vacancies in Nigeria posted and updated daily - click here!
Click here to post comments
Join in and write your own page! It's easy to do. How? Simply click here to return to NGO Jobs in Africa.
